+86 519 87878918
ΑγγλικάEN
  • /img/biomass-and-mineral-powder-filled-bio-plastic-pla-pbat-compounding-line.jpg
  • /upfile/2020/12/28/20201228145701_523.jpg

Βιομάζα και μεταλλική σκόνη γεμάτη Βιο-πλαστική PLA PBAT γραμμή σύνθεσης

Τόπος καταγωγής: Κίνα
Μάρκα: Jwell
Πιστοποίηση: ISO CE
Ελάχιστη ποσότητα παραγγελίας: 1
Όροι Πληρωμής: 30% προκαταβολή με T / T, 70% υπόλοιπο πριν από την αποστολή με T / T.
ΕΡΕΥΝΑ
  • Περιγραφή
  • Εργοστασιακό βίντεο

Περιγραφή:

Plastic has been widely developed in many fields because of its advantages of light weight, high strength, stable chemical properties and low cost.The plastics industry is developing very fast, and there is no proper way to dispose of the used plastics, which cause serious pollution to the natural environment.Thus, the study of biodegradable plastics is inevitable!Solid waste such as plastic will pollute the environment, buried deep will invade the land, burning will pollute the air, these are not the fundamental solutions to the problem.The fundamental solution to the problem is to develop degradable plastics instead of non-degradable plastics.Degradable plastics have been developed to protect the environment.It makes a lot of sense.The excellent performance of degradable plastics is obvious and has a broad development prospect.

 

προδιαγραφές:

 

Μοντέλο

L / C

Ταχύτητα

ισχύς κινητήρα

Επίπεδο ροπής

Χωρητικότητα

Typical formula

CJWH-52

40-56

400 σ.α.λ.

55KW

9N.m/cm3

180KG / Η

Bio-plastic+35%

Biomass & mineral

σκόνη

CJWH-65

40-56

400 σ.α.λ.

110KW

9N.m/cm3

360KG / Η

CJWH-75

40-56

400 σ.α.λ.

160KW

9N.m/cm3

530KG / Η

CJWH-95

40-56

400 σ.α.λ.

355KW

9N.m/cm3

1100KG / Η

CJWS-52

40-56

400 σ.α.λ.

75KW

11N.m/cm3

260KG / Η

CJWS-65

40-56

400 σ.α.λ.

132KW

11N.m/cm3

450KG / Η

CJWS-75

40-56

400 σ.α.λ.

200KW

11N.m/cm3

680KG / Η

CJWS-95

40-56

400 σ.α.λ.

400KW

11N.m/cm3

1300KG / Η

CJWS-75 Plus

44-56

400 σ.α.λ.

250KW

13.5N.m/cm3

800KG / Η

 

Ανταγωνιστικό πλεονέκτημα:

Dosing system:Raw material of bio-plastic, biomass powder and mineral powder are fed into twin screw extruder via accurate LIW feeders separately with high automation
and flexibility to adjust formulation.
Compounding system:Modular twin screw extruder equipped with super high torque gearbox, wear resistant & corrosive resistant barrels and screw elements, high torque shaft and safety clutch, efficient heating and precise control to ensure stable, reliable and long term production.
Underwater cutting system:Advance underwater cutting system can produce elliptical pellet with high automation, the closed system has no emission of smoke and dust to environment and can adapt to various capacity requirements.
Downstream auxiliary equipments:Rich and reasonable downstream equipments realize homogenization, sieving, drying & cooling until automatic packing smoothly.

Επικοινωνία