+ 86-519-87878918
TuranciEN
  • /img/sheet-die-series-jw-b-c1-11.jpg

Takardar Mutuwar Jari-JW-B-C1

BINCIKE
  • details
  • Aikace-aikace
  • Amfanin da ya dace
  • KYAUTA & SAUKI

Standard coat-hanger design, the upper die lip adjusting adopts the push-pull type or push-out fine-tuning type;the lower die lip can exchange, the maximum adjusting range up to 5 mm, it is suitable for the production of PC, PMMA, GPPS, PET, single-layer or multi-layer high transparent sheet or plate

1. Jwell ne mafi girma filastik extrusion inji manufacturer a China.We aiki a hankali tare da duniya shahara iri , your kayan aiki kuma za a iya sanye take da wani bangaren iri kana so .

2. Jwell yana da tagwayen parrel dunƙule extrusion gwajin line da guda dunƙule gwajin line. Lab ɗin gwajin mu yana goyan bayan ku gwadawa ƙarƙashin ingantattun abubuwan samarwa da kuma ƙara haɓaka fasahar sarrafa ku ta gwajin mu kuma yana taimaka muku zaɓar nau'in kayan aiki da ya dace.

3. Yin aiki tare da Jwell za ku iya tabbata cewa sabis ɗinku da buƙatun kulawa za su kasance daidai da rubuce-rubuce kuma kuna da ainihin albarkatu da ƙwarewa a wurin kafin farawa. Ƙwararrun ƙungiyarmu za ta yi aiki tare da ku don gano mutane, albarkatun da takardun aiki da za ku buƙaci don tallafawa ayyukan kula da ku.
4. Jwell yana ba da horo na fasaha, tuki da tsarin horo ga ma'aikata da injiniyoyi daga mai sayarwa daga ko'ina cikin duniya.

Dukkanin injunan suna kunshe da ƙungiyar kwararrun mu, za a cika su da pallet na katako. Don wasu mahimman kayan gyara, za mu shirya tare da akwatin katako.

Tuntube Mu